ACT-50 · Replacement of pinion and keyway in hydraulic motors.
Description
With the machine turned off and disconnected from the tractor, release the engines that the machine carries one by one, to release the engines you may have to release the hoses or hydraulic tubes that hold them, so be careful with oil spills. Once the engine is released, remove it from its housing and releasing the axle nut, you can remove and replace the splined sprocket and the key. It is important that when performing this process you replace both components as well as the nut and washer of the axle. It is recommended to take advantage of the fact of disassembling the engine to change the seal which will increase the life of the engine.
Compatible machine families
BASIC-LBASIC-PCONDORID-REXNAKIRIOLIXPFPPFS-iPV-SETOV-DUALV1V5
Maintenance that uses this task
| Maintenance | Machine families |
|---|---|
| MM-7 · Maintenance at 800 hours | AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd |
Associated resources
There are no associated resources
Available in a future release