ACT-62 · Replacement of the probe drag axis.

Description

With the machine turned off and disconnected from the tractor, remove the inter-vine guard fairing, loosen the tensioner spring and remove it, loosen the 3 screws present in the head of the rotation bushing of the drive shaft and the probe rod must be removed from the bottom of said bushing, remove the prisoner that blocks the detection eccentric of the probe sensor and the drive shaft bushing can be removed from the top, replace both the bushing and the rod of the probe shaft with new ones and repeat the process in reverse. (Check the existence of the kit).

Compatible machine families

BIOCOMBICULTIFRUTFRONT-XLID-FRONTID-NAMICID-WEEDERID-XLVENTRALX-TREME

Maintenance that uses this task

MaintenanceMachine families
MM-8 · Maintenance at 2,400 hours
AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd

Associated resources

There are no associated resources

Back to Maintenance actions

Available in a future release