ACT-49 · Replacement compression spring and probe ball.
Description
With the machine turned off and disconnected from the tractor, remove the plastic fairing from the inter-vine stylus, then loosen the lock nut and screw under the traction spring and remove the plug on which the screw is threaded. Remove the spring inside as well as the steel ball and replace both.
Compatible machine families
BIOCOMBICULTIFRUTDAVICULTORFRONT-XLID-FRONTID-NAMICID-WEEDERID-XLVENTRALX-TREME
Maintenance that uses this task
| Maintenance | Machine families |
|---|---|
| MM-10 · Maintenance at 1,200 hours | BIOCOMBICULTIFRUTDAVICULTORFRONT-XLID-FRONTID-NAMICID-WEEDERID-XLVENTRALX-TREME |
Associated resources
There are no associated resources
Available in a future release