ACT-57 · Review and regulation of the tare weight of the pressure limite

Description

With the machine switched off and disconnected from the tractor, connect a pressure gauge to the limiter or then and a flow meter below. Connect and start the machine, and operate a hydraulic cylinder until the end of the stroke, keeping the drive to see the maximum pressure of the system. In the process of increasing the pressure, you will be able to see from what moment the limiter begins to divert flow to the tank and a drop in flow rate can be seen in the flow meter reading. With the help of a fixed wrench and an allen key, adjust the restrictor tariff to the reference value indicated in the manual for your machine. This value, regardless of the machine model, should never exceed 220Bar or be below 180Bar, (in the case of a tractor directly connected to the tractor, it should not be below 160 bar).

Compatible machine families

AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd

Maintenance that uses this task

MaintenanceMachine families
MM-7 · Maintenance at 800 hours
AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd

Associated resources

There are no associated resources

Back to Maintenance actions

Available in a future release