ACT-63 · Hydraulic oil change tank (10w30, hv68).
Description
With the machine turned off and disconnected from the tractor, place a container of at least 35L capacity under the tank. Release the 1/2"G cap that is located at the bottom of the tank, be careful with oil spills. Allow the tank to empty completely. Once you have the tank empty, open the upper lid of the tank and inserting your hand together with a paper, clean the tank internally to remove any impurities that may remain inside. Once this is done, replace the cap on the bottom (it is recommended to change the metal-rubber gasket) and proceed to fill the tank at the top with oil (10W30, HV68). Pay special attention to ensure that the oil is clean and that no impurities fall into the tank."
Compatible machine families
Maintenance that uses this task
| Maintenance | Machine families |
|---|---|
| MM-6 · Maintenance at 2,400 hours | AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd |
Associated resources
There are no associated resources
Available in a future release