ACT-81 · Replacement of suction filter.
Description
With the machine turned off and disconnected from the tractor, make sure that the oil is cold. Depending on the model of the machine, the suction filter can be cartridge or submerged. By placing a clean bucket or drum near the control panel, the level of the control unit should be emptied until it is below the location of the suction filter and then placed on the floor next to the tank to avoid oil spills. Remove the suction filter and replace it with a new filter. The microns and materials of the filters are critical for the correct operation of the machine, for this reason, it is highly recommended to use original spare parts. Once the suction filter has been reassembled, if the oil is in good condition, you can refill the tank with it, otherwise replace the removed amount with new oil.
Compatible machine families
Maintenance that uses this task
| Maintenance | Machine families |
|---|---|
| MM-7 · Maintenance at 800 hours | AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd |
Associated resources
There are no associated resources
Available in a future release