ACT-83 · Replacement of the return filter.
Description
With the machine turned off and disconnected from the tractor, make sure the oil is cool. The return filter is located inserted into the hydraulic control unit in the line that goes from the cooler to the bottom of the tank. Place a bucket on the ground next to the tank to prevent oil spills. Remove the plastic filter cap and remove it from the tank. If the cover is in good condition, you can release the filter element from the cover with a quarter turn and replace only the filter element. If the cover has been damaged when removing it, it is recommended to replace the complete filter. The microns and materials of the filters are critical for the correct operation of the machine, for this reason, it is highly recommended to use original spare parts.
Compatible machine families
Maintenance that uses this task
| Maintenance | Machine families |
|---|---|
| MM-7 · Maintenance at 800 hours | AL-CALHALMOND-3BASIC-LBASIC-PBIOCOMBICONDORCULTIFRUTDAVICULTORDAVICULTOR 2.0DEADEFEAHECO-CUTECOFEEDECOTRIMEFIC-PFRONT-XLFRTI-DUSTI-GREENID-AID-DUALID-FRONTID-NAMICID-REVID-REXID-ROLLID-TERRAID-WEEDERID-XLLAT&GONAKIRIOLIXPFOPFPPFS-iPFS-i-CPROFEEDPRUNEXPV-LPV-L-RPV-SETOPV-TUNELPV-TUNEL-RPV-VIEWPV-VIEW-RPVORANNAREV-2RUNDERSURFEEDTD-FASTTD-KERRTD-LTD-RTD-SOTD-VIDTRIM-PROV-DUALV1V5VENTRALX-TREMEX10-TILLERgdgd |
Associated resources
There are no associated resources
Available in a future release