Series
ID-XL · Chasis frutales con intercepas
Maintenance
MM-1 · 8 hours
5 tasksMM-2 · 40 hours
6 tasksMM-9 · 80 hours
5 tasksMM-3 · 200 hours
2 tasksMM-4 · 400 hours
5 tasks- ACT-36 · Revision of synchronization of chassis extension cylinders.
- ACT-38 · Status check of stylus rod and probe shaft.
- ACT-39 · Review of inter-vine bearing clearances.
- ACT-41 · Revision of ball joint wear cylinder and retractable pin.
- ACT-103 · Tightening of fittings and condition of hydraulic pipes.
MM-5 · 800 hours
4 tasksMM-7 · 800 hours
10 tasks- ACT-40 · Check the status of sensors and their wiring.
- ACT-48 · Replacement of probe knurled prisoners (drag shaft).
- ACT-52 · Replacement of inter-strain cylinder ball joints.
- ACT-55 · Review of pump performance.
- ACT-56 · Checking for oil leaks in hydraulic cylinders.
- ACT-57 · Review and regulation of the tare weight of the pressure limite
- ACT-81 · Replacement of suction filter.
- ACT-82 · Replacement of high pressure filter.
- ACT-83 · Replacement of the return filter.
- ACT-109 · Replacement of the Nylon/Bronze mast plates and telescopic guid
MM-10 · 1,200 hours
1 taskMM-12 · 1,200 hours
1 taskMM-6 · 2,400 hours
6 tasks- ACT-63 · Hydraulic oil change tank (10w30, hv68).
- ACT-115 · Changing cable ties.
- ACT-118 · Checking oil leaks in interstrain cylinders.
- ACT-120 · Changing the filters of the hydraulic power plant.
- ACT-121 · Hydraulic pressure control and regulation.
- ACT-126 · Complete overhaul and tuning of the machine by specialized tech
MM-8 · 2,400 hours
7 tasks- ACT-59 · Replacement of inter-strain valve wear kit.
- ACT-60 · Replacement of inductive sensor wiring of the probe.
- ACT-61 · Retractable bolt replacement.
- ACT-62 · Replacement of the probe drag axis.
- ACT-66 · Pump replacement.
- ACT-67 · Replacement of knives and counter-knives.
- ACT-68 · Workshop set-up 2400 hours.
MM-11 · 4,800 hours
1 taskMM-13 · 4,800 hours
1 task
Available in a future release
